Fai-oe-oe lava fale'ie fagota taumalulu: ata tusi, ata ma ata vitio

Winter fishing is a lot of positive emotions that can be diluted with some of the negative emotions associated with weather conditions. It is not difficult to imagine what discomfort the angler feels in the presence of frost, and even wind, which enhances the feeling of cold. The wind may not be strong, but it can bring a lot of problems. If you have a winter tent for fishing, then some of the problems can be reduced to zero.

The presence of a tent allows you to increase the total time the fisherman stays on the pond in the winter. Moreover, you can easily raise the temperature in the tent to a positive mark, which will allow the fisherman to feel very comfortable.

Types of tents for winter fishing

Depending on the design features, winter tents are divided into specific models.

Malala

These are the simplest designs that are easy to assemble and install. To make the frame of such a tent, you should use durable, but lightweight materials. Synthetic fabrics or their combinations with tarpaulin are more suitable as an awning for covering.

automatika

The design is designed in such a way that the frame acts as a spring, which takes the desired shape when it is released from the package. They are quite popular due to their simplicity of design and lightness. Despite this, these tents have a number of disadvantages. Firstly, they are not very resistant to strong winds, and secondly, it is not so easy to fold it. Therefore, going fishing, you will have to work out before that. It unfolds itself, but without skills, it will be very difficult to fold it, and if you overdo it, you can break it.

fausaga

This tent consists of several folding arcs and an awning, which covers this frame. We can safely say that this is the same simple option, but it takes a long time to assemble and disassemble. In addition, it is not particularly durable. Therefore, anglers rarely acquire a similar design.

Requirements for a homemade tent for winter fishing

A winter fishing tent should protect the angler from wind, frost and precipitation. Not only that, the tent should have enough space to relax so that you can cook dinner or just drink tea to keep warm.

In specialized outlets, you can buy any tent, especially since the range is very large. Be that as it may, some anglers make them on their own, taking into account all the requirements. In addition, who, if not fishermen, knows what kind of tent is required. Moreover, not all factory-made models meet the requirements of winter fishing enthusiasts.

A homemade tent should be:

• quite light and compact;
• mobile so that you can easily move;
• covered with dense but breathable fabric;
• easy to install and dismantle;
• durable and strong, as well as keep warm for a long time.

To work, you will need to stock up on such tools

Most angler-made tents fit in a fishing box. The box, by the way, can also be made independently, which is what many fishermen do, although you can buy it. In addition to the box, you will need the following accessories:

• two pairs of skis, one for children, one for school;
• tubes. In this case, it can be ski poles;
• unnecessary folding bed;
• thick fabric, such as a tarpaulin.

At first glance, how can a tent be built from such a set of elements. But, nevertheless, such a design proved that it has the right to life. The final product fits into a fishing box, which is very easy to transport across the ice. The construction is quick and easy to assemble and just as easy to move across the ice in working order.

The only negative is that there is not enough space in it. But if you approach the problem constructively, then there is an opportunity to solve it and increase the tent in volume. Paradoxically, but it protects from the cold, and this is the main thing.

Drawings of a homemade winter tent

Judging from the drawings, the tent is mounted on skis, which simplifies its installation on the ice. Ordinary tents require special fasteners. In addition, skis allow you to move the entire structure around the pond countless times. As a rule, winter fishing is not limited to one punched hole – there can be ten or even more, and each hole has to be caught.

The only thing is that it is problematic to use it in the presence of a strong wind, since it is installed on skis, the wind will be able to move it around the pond on its own. In this case, you can get used to it and use the power of the wind to move it. The main thing is to drill holes correctly.

Fa'agasologa fa'asolosolo

Despite the fact that this design was born a long time ago, many anglers have tested it in the harsh conditions of winter.

How to make a tent with your own hands

• Ski poles serve as a frame and are installed vertically. Horizontal tubes should be thinner. At the corners, the frame is connected using tees, the diameter of which must match the diameter of both vertical and horizontal tubes.
• The next step is to attach the vertical tubes to the skis. A metal plate is attached to the ski, into which a tongue is inserted in the letter T, fixed at the lower end of the tube. To fix the stick, it is enough to turn it at an angle of 90 degrees.
• From an old folding bed, two sticks are being prepared that will connect the frame to the box. A bent tube is taken, at the end of which there is a docking station. At the other end of the tube is a latch, which serves as a fastener for the docking station.
• A spring is made from a copper strip, which connects the box with the tubes.
• In conclusion, it remains to stretch the awning. Metal strips with holes are attached to the bottom of the tent. Brackets fixed to the ends of the skis are pulled into these holes. The awning is connected with brackets using ropes. For stable behavior of the tent on ice, it is equipped with two anchors.

How to make fasteners

If the tent is not fixed on the ice, then at the slightest movement it will move in any direction, especially in the presence of wind. Therefore, it is necessary to make special pegs, at the end of which there is a thread. For this purpose, long and durable self-tapping screws are suitable, the top of which is bent in the form of a hook. By the way, hooks with threads of any size are available in hardware stores.

How to sew a tent with your own hands

Alternatively, you can make a tent in the form of a house. To make it you need to take:

• Water-repellent fabric, 14 sq. meters.
• Metal washers, 1,5 mm in diameter, 20 pcs.
• Braided rope, up to 15 m long.
• Narrow tape, about 9 m long.
• Bedding fabric, rubberized within 6 m.

Such a tent can accommodate one or even two people. First of all, you need to prepare two pieces of fabric, measuring 1,8×0,9 m. On the side of 1,8 m, marks are made every 65 centimeters. The same is done with the other (0,9 m) side. The fabric should be cut at the connection points, then you get the entrance and the back wall of the tent.

The diagram shows step-by-step the implementation of further work. Most importantly, all details must be sewn securely. Tape should be used to reinforce the seams. There are times when a tent is sewn from ordinary fabric. In case of bad weather, a polyethylene film is used, which is able to protect against wind and precipitation. Metal rings are sewn into the fabric for fastening. As a rule, they are placed along the bottom of the awning, as well as in the places where the fabric is attached to the frame.

Setting up a tent on a pond

Assembling a homemade ski tent takes a minimum of useful time:

1. The skis, on which the tongues are fixed, are connected to the halves of the tubes located parallel to the skis. They should be directed inside the tent.
2. Each pair of bent tubes is threaded through special holes located on the ski racks.
3. Skis are interconnected so that a rectangle is obtained.
4. A fishing box is installed on the structure prepared in this way.
5. At the ends of each ski, vertical racks are installed. There should be four of them.
6. Tees are taken and with the help of them a roof is formed. They are installed on each vertical rack.
7. With the help of horizontal tubes, the frame is finally formed.
8. A fabric is thrown over the frame, which is attached to the frame with short ropes.

A similar tent is disassembled in the reverse order. If each structural element is numbered, then the assembly and disassembly process will take somewhat less precious time.

Naturally, a tent can be purchased at a store, but not every winter fishing enthusiast is ready to purchase it, due to the lack of extra funds. Much cheaper and easier to make it yourself.